Disclaimer: You are runing the ""VFD Controller.EXE" at your own risk and no guarentees are given.

VFD PID Setup
PD013 set 08 to reset to factory settings
PD001 is set to 2
PD002 is set to 2
PD003 is set at 400Hz
PD004 is set at 400Hz
PD005 is set at 400Hz
PD006 is set to 3
PD008 is set to 220
PD009 is set to 15
PD010 is set to 8
PD011 is set to 120
PD070 is set to 0
PD071 is set to 20
PD072 is set at 400Hz
PD142 is set to 7
PD143 is set to 02
PD144 is set to 3000
PD163 is set to 1
PD164 is set to 1
PD165 is set to 3


VFD Controller setup
1. Copy "VFD Controller.EXE" to any folder.
2. Before running the spindle you must setup the ports and baudrate for your USB->RS485
3. Run "VFD Controller.EXE"
4. Click "Setup" button
5. Select the correct COM port
6. Select the correct Baudrate
7. Click "Save" button

First enter the spindle speed - >=6000RPM and <=24000RPM
Now you can run the spindle CW or CCW
Speed can be adjusted while the spindle is running by sliding the slider or entering manually.